Release: 2.0.4.0
Date: 16/02/2018
tag: v2.0.4
================================
* RM2508 Indication of the WOL state does not work correctly
* RM2520 WOL in 2.0.3.0 Linux driver dosn't work with B0 cards
* RM2512 No traffic on FW 1.5.58 with 2x Linux driver
* Wrong MTU size checks (< Min or > Max) are now working again on linuxes < 4.10
* Fix compilation on linux 3.16
* Reset sequence fix: RBL secure chip reset sequence have to reset SPI
* RM2536 allow Live MAC change
* napi_alloc_skb improves performance on high packet rates

Release: 2.0.3.0
Date: 29/01/2018
tag: v2.0.3
================================
* netdev syncup
* RM2209: WOL feature (magic packet only)
* Cable length and temp diagnostics data in sysfs
* RM2370 Errors are appear during uninstalation linux driver

Release 2.0.2.0
tag: v2.0.2
25/01/2018 f/w 1.x, 2.9.x, 3.x or above
================================
* netdev syncup: Do not reset curr_stats on each up/down
* netdev syncup: typo Octects
* RM2420:Wrong felicity IDs and link speeds reported

Release 2.0.1.0
tag: v2.0.1
30/11/2017 f/w 1.x, 2.9.x, 3.x or above
================================
*RM2267:Statistics mistakes and errors
*RM2128:... PCI errors and NMI

Release 2.0.0.0
tag: v2.0.0
17/11/2017 f/w 1.x, 2.9.x, 3.x or above
================================
+ Reset sequence implemented
* MAC address readout fixed

Release 2.0.0.0-alpha2
tag: v2.0.0-alpha2
11/11/2017 f/w 3.0.3 or above
================================
* kernel 3.x build fixed

Release 2.0.0.0-alpha1
tag: v2.0.0-alpha1
10/11/2017 f/w 3.0.3 or above
================================
+ Initial support for both 1.x, 2.x and 3.x FW
* 64bit wide statistics in ethtool
! Full reset sequence is not yet implemented
! Link status is polled, no isr usage yet






Release 1.6.12.0 master 10_09-2017 f/w 1.5.14 or above
=============
+QNAP requesting ethtool -c option (#2053)
*Statistics never gets zeroed upon interface down/up (#2015)
*Non optimal Interrupt Moderation Rates default settings makes udp very slow (#2041)

Release 1.6.11.0 master 09_25-2017 f/w 1.5.14 or above
=============
*Link state is up right after link up command execution for 2 seconds then link goes down (#2033)
*Netnext mainline syncup

Release 1.6.10.0 master 09_20-2017 f/w 1.5.14 or above
=============
*Invalid queue state management causes Tx/Rx to die (#1941)
*kernel mainline driver does not support jumbo frames (#1985)

Release 1.6.9.0 rel-dev-1.6.9 08_11-2017 f/w 1.5.14 or above
=============
*MSM counters are not reset after driver is unloaded/loaded. (#1619).
*Kernel panic/memory corruption on multicast > 32 (#1864).
*Incorrect Interrupt moderation values assignment in linux driver (#1918).
*Fix for enabling incorrect interrupt vectors count on Puma 7 Intel SoC (with Linux Kernel 3.10).
*Removed unuseful spinlocks from datapath.
*Minor fixes.

Release 1.6.8.0 rel-dev 07_05-2017 f/w 1.5.14 or above
=============
*Fix for RX datapath initialization.
*Minor fixes.

Release 1.6.7.0 rel-dev 05_05-2017 f/w 1.5.14 or above
=============
*Synced with linux sources tree.
*Support for GRO
*Fixed Ethtool -S crash
*Support for kernels >= 3.10
*Minor fixes.

Release 1.6.2.0 rel-kernel-arm 03_16-2017 f/w 1.5.14 or above
=============
*Synced with linux sources tree.
*Fixed checksumm offloads for IPv6.
*Added support for ARM.
*Support for kernels 4.4, 4.8, 4.9
*Minor fixes.

Release 1.5.345.0 rel-kernel-b0-v3 01_19-2017 f/w 1.5.14 or above
=============
*Linux upstream fixes
*Add fw version checking
*Fix pm-resume crash.

Release 1.5.335.0 rel-kernel-b0-v3 01_09-2017 f/w 1.5.14 or above
=============
*Linux upstream fixes

Release 1.5.324.0 dev-pb-b0-cln-2 12_17-2016 f/w 1.5.14 or above
=============
*hibernate fix
*Minor fixes and code cleanup

Release 1.5.300.0 dev-pb-b0-cln 12_06-2016 f/w 1.5.14 or above
=============
*d109 pid support
*Minor fixes and code cleanup


Release 1.5.248.3 dev-pb-b0-clean 11-30-2016 f/w 1.5.14 or above
=============
* fix change link speed while NIC down.

Release 1.5.247.3 dev-pb-b0-clean 11-30-2016 f/w 1.5.14 or above
=============
* fix netif status

Release 1.5.246.3 dev-pb-b0-clean 11-29-2016 f/w 1.5.14 or above
=============
+Felicity PID support
*Updated TX/RX throttling params
*Minor fixes and code cleanup

Release 1.5.245.3 dev-pb-b0-clean 11-23-2016 f/w 1.5.14 or above
=============
+CSO error workaround (Bug #701)
+ifconfig filter support (promisc/multicast/broadcast/allmulti)
+Minor fixes and code cleanup


Release 1.5.244.3 dev-pb-b0-clean 11-19-2016 f/w 1.5.14 or above
============
* Fix #701 workaround 

Release 1.5.243.3 dev-pb-b0-clean 11-16-2016 f/w 1.5.14 or above
============
+improved ethtool statistics

Release 1.5.239.3 dev-pb-b0-clean 11-11-2016 f/w 1.5.14 or above
============
+NAPI compliance fix
+Hot unplug fix
+Minor fixes and code cleanup



Release 1.5.210.3 dev-pb-b0-clean 11-03-2016 f/w 1.5.14 or above
============
+Fixed Jumbo frames.
+RSS fixes (new hash key, print RSS settings via ethtool)
+Minor fixes and code cleanup

Release 1.5.203.3 dev-pb-b0-clean 10-31-2016 f/w 1.5.14 or above
=============
+Support SuseServer 12.1
+Fixed kernel panic on CentOS 7.


Release 1.5.201.3 dev-pb-b0-clean 10-29-2016 f/w 1.5.14 or above
=============
+Support Centos
+Minor fixes and code cleanup

Release 1.5.200.3 dev-pb-b0-clean 10-29-2016 f/w 1.5.10 or above
=============
+Support new VID/PID.
+Fixed and tested the driver for B0 on FPGA.
+Support LRO for B0 on FPGA.
+Fixed link status detect.

Known issues:
- Build failed on Centos


Release 1.5.100.3 10-22-2016 f/w 1.4 or above
=============
+ Ethtool statistics
* Debian 6 kernel build
* A0/B0 support

Know issues:
- Link status hardcoded always '1G connected'
