NT2 U3

As of November 1, 2016, the NT2 U3 has been discontinued and this model is no longer being manufactured, sold or maintained.

The NT2 U3 was a dual-bay RAID storage enclosures with a screwless design to easily install and replace up to two 3.5" hard disk drives. The hardware RAID controller supports Non-RAID, RAID 0 and RAID 1. It features a USB 3.0 SuperSpeed connection.

This model has been replaced by the NT2 U3.1 with a faster USB 3.1 Gen 2 interface up to 10Gbps. The NT2 U3.1 has also been designed for two 3.5" drives and comes with a built-in hardware RAID controller supporting Non-RAID, RAID 0 and RAID 1.

NT2 U3e

As of October 1, 2016, the NT2 U3e has been discontinued and this model is no longer being manufactured, sold or maintained.

The NT2 U3e was a dual-bay RAID storage enclosures with a screwless design to easily install and replace up to two 3.5" hard disk drives. The hardware RAID controller supports Non-RAID, RAID 0 and RAID 1. It features a dual-interface USB 3.0 SuperSpeed and eSATA connection.

This model has been replaced by the NT2 U3.1 with a faster USB 3.1 Gen 2 interface up to 10Gbps. The NT2 U3.1 has also been designed for two 3.5" drives and comes with a built-in hardware RAID controller supporting Non-RAID, RAID 0 and RAID 1.

FD-2500 U3

As of September 1, 2016, the FD-2500 U3 has been discontinued and this model is no longer being manufactured, sold or maintained.

The FD-2500 U3 was a slim, compact and portable hard drive enclosure with a durable high quality ABS plastic exterior designed for a single 2.5" drive up to 9.5mm. It featured a USB 3.0 SuperSpeed connection.

This model has been replaced by the Neutrino U3.1, an aluminum enclosure with a faster USB 3.1 Gen 2 interface up to 10Gbps.

Taurus Mini Super-S LCM

As of May 1, 2016, the Taurus Mini Super-S LCM has been discontinued and this model is no longer being manufactured, sold or maintained.

The Taurus Mini Super-S LCM was a 2-bay storage enclosure with built-in hardware RAID designed for two 2.5" hard disk drives. It featured a 3-in-1 interface with eSATA, FireWire 800 and USB 2.0.

There replacement for this model is the Taurus Mini Super-S3 LCM. It's identical with the old model except that the USB interface is now USB 3.0 instead of USB 2.0.

MD4 U3e

As of December 1, 2015, the MD4 U3e has been discontinued and this model is no longer being manufactured, sold or maintained.

The MD4 U3e was a 1U 19" rack-mount chassis with built-in hardware RAID designed for up to four 3.5" hard disk drives. It featured a hot swap rack and a dual interface with eSATA and USB 3.0.

There is no replacement for this model and there are currently no alternative rack-mount chassis available from AKiTiO.