A Response to COVID-19 From OWC Founder and CEO, Larry O'Connor
MyCloud Mini

As of August 31, 2019, the MyCloud Mini has been discontinued and this model is no longer being manufactured, sold or maintained.

The MyCloud Mini was a network drive with built-in UPnP-AV media server designed for one 2.5" SATA hard disk drive. The MyCloud software made this NAS an easy device to setup an use as a personal cloud server at home and for remote access.

There is no new version or alternative available for this particular model.

5-Speed 10G/NBASE-T PCIe Network Card

As of August 1, 2019, the 5-Speed 10G/NBASE-T PCIe Network Card based on the Tehuti TN4010 network controller has been discontinued and this model is no longer being manufactured, sold or maintained.

The 5-Speed 10G/NBASE-T PCIe Network Card was based on Tehuti’s 3rd generation TN4010 10 Gigabit Ethernet controller designed for low-power, low-cost, single-port connectivity required by Application Servers and Workstations.

The replacement for this card can be found under the same name 5-Speed 10G/NBASE-T PCIe Network Card, which is based on the Aquantia AQtion AQC107s chip.

Akitio Mobile Apps Discontinued

Mobile apps for the MyCloud and CloudHybrid series from Akitio have been discontinued and are no longer available for download.

Apps that have already been installed can still be used but might stop working with future updates of iOS and Android.

Please be aware that services at myakitio.com will be discontinued on August 31, 2019. After that, when using the apps, it will be necessary to use the IP address of your device or use a dynamic DNS service instead to login.

AKiTiO Thunder3 10G Network Adapter

As of December 30, 2018, the AKiTiO Thunder3 10G Network Adapter has been discontinued and this model is no longer being manufactured, sold or maintained.

The AKiTiO Thunder3 10G Network Adapter was a bus-powered Thunderbolt 3 to 10G Ethernet adapter. It was designed for Thunderbolt 3 capable notebooks like the MacBook Pro (late 2016) and professional workstations that require reliable, accelerated access to external storage and networks for I/O demanding applications.

As an alternative, we recommend the OWC Thunderbolt 3 10G Ethernet Adapter.

NT2 U3.1

As of September 1, 2018, the NT2 U3.1 has been discontinued and this model is no longer being manufactured, sold or maintained.

The NT2 U3.1 was a dual-bay RAID storage enclosures with a screwless design to easily install and replace up to two 3.5" hard disk drives. The hardware RAID controller supports Non-RAID, RAID 0 and RAID 1. It features a SuperSpeed 10Gbps (USB 3.1 Gen 2) connection.

This model has been replaced by the NT2 U31C, which utilizes a USB-C connector and a different kind of RAID switch. The NT2 U31C has also been designed for two 3.5" drives and comes with a built-in hardware RAID controller supporting Non-RAID, RAID 0 and RAID 1.