SK-2500 U3

As of December 1, 2017, the SK-2500 U3 has been discontinued and this model is no longer being manufactured, sold or maintained.

The SK-2500 U3 was a compact, portable and simple to use aluminum enclosure designed for 2.5" SATA hard drives. It had a USB 3.0 interface with a single Mini USB 3.0 SuperSpeed port.

This model has been replaced by the Neutrino U3, which offers the same kind of design and features.

USB 3.0 PCI Express Card

As of November 1, 2017, the USB 3.0 PCI Express Card has been discontinued and this model is no longer being manufactured, sold or maintained.

The USB 3.0 PCI Express Card was a SuperSpeed USB 3.0 PCIe add-in card that occupied one PCI Express slot (x1) and had a pair of USB 3.0 ports on the back.

It expanded two external USB 3.0 Super-Speed ports on the system. Each USB port supplied a maximum of +5V/900mA power output to USB devices.

There is no replacement for this card and there are no alternative PCIe cards available from Akitio.

USB 3.0 Express Card

As of October 1, 2017, the USB 3.0 Express Card has been discontinued and this model is no longer being manufactured, sold or maintained.

The USB 3.0 Express Card was a SuperSpeed USB 3.0 ExpressCard/34 add-in card that occupied one 34mm slot and had one USB 3.0 port.

There is no replacement for this card and there are no alternative adapter cards available from Akitio.

NT2 U3

As of November 1, 2016, the NT2 U3 has been discontinued and this model is no longer being manufactured, sold or maintained.

The NT2 U3 was a dual-bay RAID storage enclosures with a screwless design to easily install and replace up to two 3.5" hard disk drives. The hardware RAID controller supports Non-RAID, RAID 0 and RAID 1. It features a USB 3.0 SuperSpeed connection.

This model has been replaced by the NT2 U3.1 with a faster USB 3.1 Gen 2 interface up to 10Gbps. The NT2 U3.1 has also been designed for two 3.5" drives and comes with a built-in hardware RAID controller supporting Non-RAID, RAID 0 and RAID 1.

NT2 U3e

As of October 1, 2016, the NT2 U3e has been discontinued and this model is no longer being manufactured, sold or maintained.

The NT2 U3e was a dual-bay RAID storage enclosures with a screwless design to easily install and replace up to two 3.5" hard disk drives. The hardware RAID controller supports Non-RAID, RAID 0 and RAID 1. It features a dual-interface USB 3.0 SuperSpeed and eSATA connection.

This model has been replaced by the NT2 U3.1 with a faster USB 3.1 Gen 2 interface up to 10Gbps. The NT2 U3.1 has also been designed for two 3.5" drives and comes with a built-in hardware RAID controller supporting Non-RAID, RAID 0 and RAID 1.